Oil stains on concrete: what lifts them and what just spreads them

An oil stain is oil soaked into a sponge made of rock. The methods that work pull it back out slowly; the methods that fail push it deeper, faster. Here is the difference, in the order to try them.

Short answer: fresh oil gets blotted and covered with absorbent granules the same day. Set oil gets a poultice — a paste or powder that sits on the stain for hours and draws oil out as it dries. Old, deep oil that has lived in the slab for years will usually lighten, sometimes a lot, and rarely disappear. Anyone who promises otherwise is selling something stronger than chemistry allows.

What spreads a stain: hitting it with a pressure washer first (the jet drives oil sideways and deeper), scrubbing with a solvent and no absorbent (you have made a larger, thinner stain), and sealing over it (the stain is now preserved under the sealer, and some sealers darken it permanently). Every method below is built on the opposite idea — lift, hold, remove.

Disclosure, up front: How product links work here: this guide is not enrolled in any affiliate program for the products below, and the links are ordinary links — we earn nothing from them. Each link passes through our own click counter first, only so we can learn which small-job topics are actually useful. Prices and stock live on the seller's site and are shown there. If any of that ever changes, this page will say so plainly before a single earning link appears — and recommendation order will still be set by fit for the job, never by payment.

How to choose

  • Date the stain first. Still wet or this-week: absorbent only. This-season: degreaser plus brush, then poultice if a shadow remains. Years old: poultice, repeated, with lightened-not-gone as the honest target.
  • Poultice is the workhorse. Mix a powdered absorbent with a degreasing cleaner to a peanut-butter paste, spread it 1/4 inch thick past the stain's edges, cover with plastic, tape the edges, and leave it 24 hours. Sweep up the dry powder and judge the result dry — wet concrete always looks cleaner.
  • Repeat beats stronger. A second and third poultice, each pulling less, beats one aggressive solvent attempt that risks etching the surface and bleaching a light halo around a still-dark center.
  • Seal last, and only after. A penetrating sealer over a fully treated, fully dry stain slows the next spill. Over an untreated one it locks the current stain in. Order matters more than product choice.

The products in detail

Sold on eBay

Simple Green Oxy Solve Total Outdoor Cleaner Concentrate, 1 gal

Check price on eBayNo price is shown here on purpose — prices change, and the seller's page is the only honest source.

From the manufacturer

A peroxide-based concentrate cleaner for outdoor surfaces — concrete, wood, vinyl, brick, and stone — usable in a pressure washer or diluted in a bucket for manual scrubbing.

  • 1-gallon concentrate; dilutes with water (manufacturer directions)
  • Peroxide-based formula; U.S. EPA Safer Choice certified (listing data)
  • Manufacturer coverage claim: up to about 6,400 sq ft per gallon, diluted
  • For pressure-washer and manual application

Our guidance

The cleaning step before sealing and the first move on general grime and mild organic staining: dilute it, keep the surface wet with it, scrub, and rinse — the dwell and the brush do more than the pressure does. On oil, treat it as step one of the poultice method in the stain guide, not as a solvent that melts the spot away.

Availability note: this listing's current offer could not be confirmed on our build-day check — confirm it on the seller's page.

Limitations: A cleaner, not a stripper: deep, old oil that has soaked into the pores will lighten at best. Peroxide cleaners lose strength once diluted, so mix what the job needs. Build-day note: Amazon showed no featured offer for this listing when we checked — confirm an offer exists on the seller's page before planning around it.

See it on eBay

Affiliate link — this guide may earn a commission through the eBay Partner Network if you buy through it, at no extra cost to you.

What none of these do

No cleaner restores oil-soaked concrete to new, and none of these methods touch the stain's usual companion problems — the cracked, settled slab the leaking car was parked on. Treat the stain for appearance and to prep for sealing; treat the slab itself with the decision guide.

Related guides

Too big for a tube of sealant?

Everything in this product area is for small, flat, stable problems. If the slab has dropped, sounds hollow, or the cracks keep growing, no product on this page fixes it — that is contractor work, and this site's main guides exist for exactly that decision.

Work the repair-vs-replace decision guide →  ·  Get a quote from a local specialist →