How to clean a driveway before sealing it

Sealer fails on dirty concrete, not on old concrete. This is the cleaning sequence that decides whether a sealer bonds and penetrates — written to work as a standalone checklist even if you buy nothing.

Short answer: sweep and blow the slab clean, treat grease and organic stains before any water hits them, wash with a diluted cleaner and a stiff brush (a pressure washer helps but is not required), rinse until the runoff runs clear, and then wait — really wait — for the slab to dry. In Treasure Coast humidity that last step is the one everyone shortens, and it is the one that ruins sealers.

Why the order matters: water first drives loose dirt into the pores you are about to seal. Degreaser after a soak mostly spreads a thinned stain wider. And sealer over a damp slab traps moisture that will push back out as white blush or peeling — on a penetrating sealer it simply blocks penetration, so you paid for protection that stayed on the surface and washed off.

Disclosure, up front: How product links work here: this guide is not enrolled in any affiliate program for the products below, and the links are ordinary links — we earn nothing from them. Each link passes through our own click counter first, only so we can learn which small-job topics are actually useful. Prices and stock live on the seller's site and are shown there. If any of that ever changes, this page will say so plainly before a single earning link appears — and recommendation order will still be set by fit for the job, never by payment.

How to choose

  • Dry work first. Sweep, blow, and scrape while everything is dry. Loose sand and grit left in place become part of the sealed surface.
  • Stains before washing. Oil spots and rust get their own treatment (see the stain guide) before the general wash, or the wash just dilutes and spreads them.
  • Detergent plus dwell plus brush. Any outdoor cleaner in this class works the same way: dilute per the label, keep the surface wet with it for the label's dwell time, scrub with a stiff deck brush, rinse. Pressure is a rinse tool, not the cleaning agent.
  • Dry time is a specification, not a suggestion. Most sealers want a visibly dry slab and a dry forecast. In Florida summer humidity, give a washed driveway at least a full day of sun — two is safer — and tape a square of clear plastic to the slab for a few hours: condensation under it means wait.

The etch question, answered honestly

Should you acid-etch a driveway before sealing? For a penetrating sealer on ordinary broom-finished concrete: no. Etching is a preparation for some film-forming coatings on smooth, dense, troweled concrete — it opens a surface that is too tight to grip. A typical driveway is already porous enough for a penetrating product, and etching adds a hazardous step, a neutralization step, and a longer dry time for no benefit. If a film-forming product's label demands etching on your surface, that is a sign to read the penetrating-vs-film guide before choosing the film at all.

The products in detail

Sold on eBay

Simple Green Oxy Solve Total Outdoor Cleaner Concentrate, 1 gal

Check price on eBayNo price is shown here on purpose — prices change, and the seller's page is the only honest source.

From the manufacturer

A peroxide-based concentrate cleaner for outdoor surfaces — concrete, wood, vinyl, brick, and stone — usable in a pressure washer or diluted in a bucket for manual scrubbing.

  • 1-gallon concentrate; dilutes with water (manufacturer directions)
  • Peroxide-based formula; U.S. EPA Safer Choice certified (listing data)
  • Manufacturer coverage claim: up to about 6,400 sq ft per gallon, diluted
  • For pressure-washer and manual application

Our guidance

The cleaning step before sealing and the first move on general grime and mild organic staining: dilute it, keep the surface wet with it, scrub, and rinse — the dwell and the brush do more than the pressure does. On oil, treat it as step one of the poultice method in the stain guide, not as a solvent that melts the spot away.

Availability note: this listing's current offer could not be confirmed on our build-day check — confirm it on the seller's page.

Limitations: A cleaner, not a stripper: deep, old oil that has soaked into the pores will lighten at best. Peroxide cleaners lose strength once diluted, so mix what the job needs. Build-day note: Amazon showed no featured offer for this listing when we checked — confirm an offer exists on the seller's page before planning around it.

See it on eBay

Affiliate link — this guide may earn a commission through the eBay Partner Network if you buy through it, at no extra cost to you.

What none of these do

Cleaning does not repair anything. It will not close cracks, raise a settled corner, or make a failing surface sound — and sealing over a slab that is still moving just preserves the problem under a nicer-looking finish. Clean first, then judge the slab honestly: that judgment is what the rest of this site is for.

Related guides

Too big for a tube of sealant?

Everything in this product area is for small, flat, stable problems. If the slab has dropped, sounds hollow, or the cracks keep growing, no product on this page fixes it — that is contractor work, and this site's main guides exist for exactly that decision.

Work the repair-vs-replace decision guide →  ·  Get a quote from a local specialist →