Paver sealer vs. concrete sealer: the basics before you buy

Half the Treasure Coast parks on pavers and half on poured concrete, and the sealers are not interchangeable. This page prevents the most common wrong purchase in the category: the right product for the wrong surface.

Short answer: a poured-concrete driveway is one continuous slab, so sealing is about protecting that surface from water and stains. A paver driveway is thousands of separate units held in place by the sand between them, so sealing is also about the joints — many paver sealers are really joint-sand stabilizers with a surface finish attached. Buy for your structure first and your finish second.

The second difference is failure. A wrong or worn sealer on concrete is mostly a cosmetic problem you can clean and redo. On pavers, a film that traps moisture can turn white between the joints, and fixing it can mean stripping the whole field. That asymmetry is why this guide is conservative: it explains the decision and cards only penetrating products that are listed by their makers for both surfaces, rather than steering you at a paver film.

Disclosure, up front: How product links work here: this guide is not enrolled in any affiliate program for the products below, and the links are ordinary links — we earn nothing from them. Each link passes through our own click counter first, only so we can learn which small-job topics are actually useful. Prices and stock live on the seller's site and are shown there. If any of that ever changes, this page will say so plainly before a single earning link appears — and recommendation order will still be set by fit for the job, never by payment.

How to choose

  • Identify your structure honestly. Pavers over a sand bed, poured slab, or pavers over concrete? Each takes a different product logic. If you cannot tell, a photo of an edge or a drain cut usually settles it.
  • Decide what the sealer is for. On pavers: joint stability, weed and ant resistance, then finish. On concrete: water repellency and stain resistance. A product that leads with shine is answering a question you may not have asked.
  • 'Wet look' decoded. It means the surface is darkened and saturated-looking, as if just rained on — permanently. Some homeowners love it for a week and tire of it for a decade. It comes from film-formers and enhancing sealers, and undoing it is a stripping job, not a rinse.
  • When not to seal pavers at all. New pavers still releasing efflorescence (the white salt haze), joints that have already lost their sand, and any field with drainage water running under it. Fix the joints and the water first; sealer over failed joints preserves the failure.

The products in detail

Sold on eBay

Ghostshield Siloxa-Tek 8500, Ready-to-Use, 1 gal

Check price on eBayNo price is shown here on purpose — prices change, and the seller's page is the only honest source.

From the manufacturer

A ready-to-use, water-based silane/siloxane penetrating sealer for concrete, brick, masonry, and pavers: it soaks in and lines the pores instead of forming a surface film.

  • 1 gallon, ready to use — no mixing
  • Coverage up to about 250 sq ft per gallon per coat (manufacturer data)
  • Two coats, wet-on-wet, recommended by the manufacturer
  • Clear finish — no change to the surface appearance

Our guidance

The penetrating pick when the goal is water repellency with zero change in how the driveway looks — no sheen, no darkening, no film to peel in Florida heat. The one-gallon size suits a walkway, apron, or single-car pad rather than a full two-car driveway at two coats.

Limitations: Penetrating sealers repel water; they do not fill cracks, stop a slab from moving, or block oil the way a film can. It is not a stain shield for a driveway that parks a leaking car — seal the cracks first and manage expectations on old oil spots.

See it on eBay

Affiliate link — this guide may earn a commission through the eBay Partner Network if you buy through it, at no extra cost to you.

Sold on eBay

Foundation Armor SX5000 WB Penetrating Sealer, 5 gal

Check price on eBayNo price is shown here on purpose — prices change, and the seller's page is the only honest source.

From the manufacturer

A water-based silane-siloxane penetrating sealer that reduces water absorption in concrete, brick, pavers, and natural stone while leaving a natural, unchanged finish.

  • 5-gallon pail (part SX5000WB5GAL)
  • Water-based silane-siloxane chemistry
  • Natural-look matte finish — no film
  • Applied by pump sprayer or roller (manufacturer guidance)

Our guidance

The same penetrating idea as the one-gallon pick, in the size that makes sense for a full driveway: five gallons covers a typical two-car slab at two coats without a mid-job reorder. Choose between the two penetrating examples on size and price at the seller, not on chemistry — both are silane/siloxane water repellents.

Limitations: Five gallons is a commitment — leftover penetrating sealer has a shelf life, so measure the slab before choosing the pail over the gallon. It will not darken, gloss, or hide stains, and it does not repair the surface it protects.

See it on eBay

Affiliate link — this guide may earn a commission through the eBay Partner Network if you buy through it, at no extra cost to you.

What none of these do

Sealer does not re-level a settled paver field, re-compact a failed base, or re-sand joints that have emptied — those are reset-and-relay jobs. And on the concrete side, it does not do any of the lifting this site's main guides describe. It protects a surface that is already in the condition you want to keep.

Related guides

Too big for a tube of sealant?

Everything in this product area is for small, flat, stable problems. If the slab has dropped, sounds hollow, or the cracks keep growing, no product on this page fixes it — that is contractor work, and this site's main guides exist for exactly that decision.

Work the repair-vs-replace decision guide →  ·  Get a quote from a local specialist →