Concrete crack fillers compared: self-leveling sealant, backer rod, and when a crack is too big to fill

Most driveway cracks need a ten-dollar tube, not a ten-thousand-dollar pour — but only the flat, stable ones. This guide sorts fillers by crack width and depth, and says plainly where filling stops working.

Short answer: measure the crack before you buy anything. Hairline cracks in a flat slab usually need nothing more than a penetrating sealer and a watchful eye. A horizontal crack or joint up to about 1/2 inch wide is backer-rod-and-sealant territory. Anything wider, anything with one side higher than the other, and anything that keeps growing is not a filler problem at all — it is movement, and movement has a cause.

The three products below are the whole honest toolkit for the fillable middle: a self-leveling polyurethane that flows into horizontal joints, a filler sealant for short shallow cracks, and the foam rod that makes both of them work at the right depth. Everything else — the sequence, the depth math, the stop signs — is in the prose, because the products are the easy part.

Disclosure, up front: How product links work here: this guide is not enrolled in any affiliate program for the products below, and the links are ordinary links — we earn nothing from them. Each link passes through our own click counter first, only so we can learn which small-job topics are actually useful. Prices and stock live on the seller's site and are shown there. If any of that ever changes, this page will say so plainly before a single earning link appears — and recommendation order will still be set by fit for the job, never by payment.

How to choose

  • Measure width first. A coin edge is roughly 1/16 inch. Hairline (under ~1/8 in): seal and watch. Up to ~1/2 in and flat: fill it. Wider, offset, or growing: skip to the off-ramp at the bottom of this page.
  • Then measure depth. Poke a thin screwdriver in. If the joint is deeper than about half its width, the sealant needs backer rod under it — deep sealant bonded on three sides tears itself apart as the slab moves.
  • Match the chemistry to the movement. A working control joint that opens in winter and closes in summer wants the flexible polyurethane. A short, shallow, stable crack is fine with the simpler filler sealant.
  • Horizontal only for self-leveling. Self-leveling sealant finds its own level — on a slope or a vertical face it finds the low end and leaves. Sloped sections need a non-sag product or a contractor's patch.

The options, side by side

ProductBest forStandout fact
Quikrete Polyurethane Self-Leveling Sealant, 10.1 oz (No. 866010)Flat cracks and control joints to ~1/2 inFlows level; stays flexible (ASTM C 920, Class 25)
DAP Concrete and Mortar Filler and Sealant, Gray, 10.1 oz (18096)Short, shallow, stable cracks and pinholesWater cleanup; paintable; 1/2 in max gap
M-D Building Products Backer Rod, 1/2 in × 20 ft (71480)Any joint deeper than half its widthSets sealant depth; stops three-sided bonding

Comparison facts are the manufacturers', re-checked on build day, Nov 7, 2026. Prices are deliberately not shown — check the seller's page.

Best for…

Best all-round filler: Quikrete Polyurethane Self-Leveling Sealant, 10.1 oz (No. 866010)

For the common case — a flat driveway with tired control joints — this is the tube to buy, with backer rod underneath wherever the joint is deep.

See it on eBay

Affiliate link — this guide may earn a commission through the eBay Partner Network if you buy through it, at no extra cost to you.

Best five-dollar decision: M-D Building Products Backer Rod, 1/2 in × 20 ft (71480)

Skipping the rod is the number-one reason home crack repairs fail in a season. It costs almost nothing and decides whether the sealant above it survives.

See it on eBay

Affiliate link — this guide may earn a commission through the eBay Partner Network if you buy through it, at no extra cost to you.

The products in detail

Sold on eBay

Quikrete Polyurethane Self-Leveling Sealant, 10.1 oz (No. 866010)

Check price on eBayNo price is shown here on purpose — prices change, and the seller's page is the only honest source.

From the manufacturer

A single-component polyurethane sealant in a standard caulk tube that flows level on horizontal surfaces, for sealing cracks and joints in concrete.

  • 10.1 fl oz cartridge (model 866010)
  • Self-leveling — made for horizontal joints, not vertical faces
  • Meets ASTM C 920, Type S, Grade P, Class 25 (manufacturer data)
  • Stays flexible after curing

Our guidance

The default pick for a flat driveway crack or control joint up to about 1/2 inch wide: it settles into the joint instead of sitting on top of it, and the flexibility is what survives slab movement. Pair it with backer rod on anything deep — sealant alone in a deep joint is material wasted.

Limitations: Horizontal surfaces only — it will run out of a vertical or sloped joint. It seals a crack; it does not level, lift, or stabilize the slab on either side of it, and it is the wrong fix for a crack that is still actively widening.

See it on eBay

Affiliate link — this guide may earn a commission through the eBay Partner Network if you buy through it, at no extra cost to you.

Sold on eBay

DAP Concrete and Mortar Filler and Sealant, Gray, 10.1 oz (18096)

Check price on eBayNo price is shown here on purpose — prices change, and the seller's page is the only honest source.

From the manufacturer

A ready-to-use, silicone-enhanced filler and sealant paste for small cracks and holes in concrete and masonry, interior or exterior.

  • 10.1 fl oz cartridge (model 18096)
  • Maximum gap fill 1/2 inch (manufacturer data)
  • Waterproof and weather-resistant once cured
  • Paintable; cleans up with water before curing

Our guidance

The small-job alternative to the polyurethane: easier cleanup and a better match for short, shallow cracks and pinhole patching where self-leveling flow is not needed. If the crack is a working joint that opens and closes with temperature, the polyurethane's flexibility is the safer bet.

Limitations: A filler, not a structural repair — it does not bridge a joint that keeps moving, and deep voids need backer rod or patch compound first. Like every product on this page, it does nothing for a slab that has dropped.

See it on eBay

Affiliate link — this guide may earn a commission through the eBay Partner Network if you buy through it, at no extra cost to you.

Sold on eBay

M-D Building Products Backer Rod, 1/2 in × 20 ft (71480)

Check price on eBayNo price is shown here on purpose — prices change, and the seller's page is the only honest source.

From the manufacturer

A closed-cell foam rod pressed into a wide or deep joint before sealing, so the sealant sits at the right depth and bonds to the two sides of the joint only.

  • 1/2 inch diameter × 20 ft long (model 71480)
  • Closed-cell polyethylene foam
  • For gaps up to 1/2 inch
  • Cut to length; no tools beyond a utility knife

Our guidance

The cheapest product in this library and the one that decides whether the sealant above it lasts. Rule of thumb: the rod should be about a quarter wider than the joint so it wedges in, and the sealant depth should be about half the joint width.

Limitations: It is a filler, not a seal — used alone it keeps nothing out. Wrong diameter is the common failure: too thin and it sinks to the bottom of the joint, too thick and it will not seat.

See it on eBay

Affiliate link — this guide may earn a commission through the eBay Partner Network if you buy through it, at no extra cost to you.

What none of these do

None of these products lift a slab, close a crack that is still opening, or fix the soil problem underneath a settled panel. If one side of the crack sits higher than the other, the slab has moved — filling the top of a moved slab is cosmetics on a structural symptom. That case belongs to the decision guide and, usually, a lifting contractor.

Related guides

Too big for a tube of sealant?

Everything in this product area is for small, flat, stable problems. If the slab has dropped, sounds hollow, or the cracks keep growing, no product on this page fixes it — that is contractor work, and this site's main guides exist for exactly that decision.

Work the repair-vs-replace decision guide →  ·  Get a quote from a local specialist →